Technical parameters
| Item/Model | PPCS-26 | PPCS-140 | PPCS-250 | PPCS-260 | PPCS-500 | PPCS-1100 | PPCS-1800 | PPCS-2400 |
| Basket volume(L) | 21 | 110 | 200 | 210 | 335 | 879 | 1390 | 1923 |
| Loading Capacity(kg) | 26 | 140 | 250 | 260 | 500 | 1100 | 1800 | 2400 |
| Max Speed(r/min) | 2600 | 1500 | 1400 | 1400 | 1200 | 950 | 900 | 950 |
| Motor power(Kw) | 15 | 37 | 45 | 45 | 75/90 | 132 | 160 | 200 |
Product introduction
PPCF/PPCC automatic centrifuge is solid-liquid separation equipment which adopts continuous operation and intermittent discharging.
The machine is controlled by PLC. It regulates speed by frequency convertor, braking system adopts dynamic braking and regenerative braking. Through such procedures as product level detection,speed,inspection,shaft temperature and vibration monitoring, the whole separation process is automatic circulative work(including feeding, dehydration, washing, discharging and etc.)
Also manual operation mode is available which can be changed over from full automation mode by customer’s will.
1. PPCC series
PPCC automatic centrifuge adopts wall penetration installation; Its power area and processing area can be separated. It can be used in pharmaceutical industry which has high requirements. The whole housing bucket can be open for inspection and cleaning.
2. PPCF series
PPCF series automatic centrifuge is not only used for medium and fine particle contained suspensions separation,but also used for the solid-liquid separation of noxious,explosive and combustible product.It adopts indined hopper or screwed conveyor to discharge solid product.
It is mainly used in solid-liquid separation of raw materials,intermediates and end products in the fields such as pharmaceutical industry and chemical industry.
3. PPCS series
PPCS Series automatic siphon centrifuge is a solid-liquid separation equipment which adopts continuous operation and intermittent discharging. Its production capacity and separation effect is better than GKF centrifuge.
It is more suitable for separating such product as small solid phase granularity and which is hard to be separated. It is widely used in pharmaceutical, chemical and foodstuff industry(e.g. starch, calcium phosphate, sodum bicarbonate)
Features
PPCC features
1. It is fully conformed to GMP/cGMP and FDA norm and meet the requirements of asepsis raw medicne product.
2. With absolute isolation between power area and process area. It is suitable for occasion when customer requires high quality cleaning to avoid the contaminaton to product.
3. The out shell bucket can be opened, so the whole inernal parts can be obseved and easy for touch wiping and cleaning.
4. Perfect CIP system can be carried out to wash the internal parts easy to clean.
5. Unique pneumatic counter-pulse device is equipped, whch can remove remnant filter cake as much as possible.
6. Totally-enclosed structure equipped with inert gas protection is adopted to be used in ex-proof one selecton.
7. The automatic residual cakes removing device is optional(have owned the national patent.)
PPCS features
1. Comparing with common horizontal centrifuges with the same specification,the production capacity can be raised by 40% to 60% and the moisture content of filter cake is lower.
2. Changing the position of siphon pipe port can regulate the filter speed,thus,different filter speed can be realized during different process as feeding separation filtering,washing and
Dehydration.The centrifuge will be always under best working condition and the equipment operates stably and the vibration and noise are rather low.
3. When the scraper is finished,the regenerate liquid will be fed from the siphon feeding pipe to regenerate and resuspension the filter cake,bake flush and remove the left filter cake.
4. The automatic residual cakes removing device is optional (have owned the national patent).
About us
Jiangsu Hanpu Mechanical Technology Co., Ltd. is a project engineering company jointly established by Jiangsu Saideli
Pharmaceutical Machinery Co., Ltd., Jiangsu Zhongyi Environmental Technology Co., Ltd., FERREO A/S in Denmark, Shanghai Jiaotong University and Nanjing Kingreat Machinery Co., Ltd. Hanpu main projects include but are not limited to: MVR evaporation system, powder washing salt and vacuum salt production project, oil tank sludge cleaning project, landfill leachate treatment project, plant/animal oil processing production line, urban wastewater treatment project, various wastewater treatment projects, and CBD oil extraction production line. Technical support and transfer of API product technology package. The main products are centrifuge series, multi-effect and MVR evaporation and crystallization equipment, laser welding heat transfer board, lithium battery material mixing equipment, pressure vessel and titanium, zirconium, nickel, and other non-standard special equipment.
FAQ
1. How can we visit your factory?
If you come from abroad, air to Shanghai airport, then take bullet train, about 1 hour from Shanghai to Nanjing South Station; if you come from our domestic city, air or train directly to Nanjing, we will pick you up both in the airport and railway station.
2. Can we visit your end user or contact them?
Yes, users are in domestic and abroad, we can provide you the name list, you can go there or contact for more info.
3. How do you protect the quality?
Our factory is a state owned enterprise with more than 100 years experience, strict operation policy is performed, advanced processing machines guarantee the precision of all components, workers with operation license, parts get
multiprocessing,transmission & electrical parts are of international famous brand. Series of test and inspection are done in the whole producing stage.
4. Will you dispatch technicians for installation and commissioning?
Yes, we can, we do lots of service, please refer to our after sales part.
5. What is your advantages compared with your competitors?
Quality and experience. We are the top centrifuge supplier in China, our designs and structures are similar to world famous
brands.
6. Is your price competitive?
Our price is not the lowest in China as for high quality, but we promise, for the same quality and collocation, our price is the
most favourite, for the same price, our quality is definately superior to other brand.
7. Do you have OEM serive? Do you supply the parts?
Yes, we do, as long as you provide us your drawing and detailed requirements.
8. Do you supply second hand centrifuge?
No, we only provide brand new machine.
9. Do you have agent or service center in my country?
We have some partnership in several countries as Indonesia, Brazil, USA, etc. Your are warmly welcomed to work as our agent. At this moment, we have no service center abroad, but we can provide overseas spot and online technical service in time.
10. How can we easily find out the most fit centrifuges?
We have experienced engineer team to help you make the model selection, as long as you provide us the detailed processing material characteristics.
11. What payment mode you accept?
TT, Wester Union and LC at sight.
